The Neo-Containers system uses cloud-container technology to abstract and
generalize container creation and initialization. At the DETER level, the
experiments have a number of physical nodes, "pnodes", which serve as hosts
for the virtualized containers. Outside of the experiment there are two
servers which configure the containers. Both run on
chef.isi.deterlab.net. The Chef server serves "code as
configuration" and stores static (for the most part) configuration
information. The config_server is a RESTful API which loads then
serves experiment-specific configuration information. The code that the Chef
server runs on the containers usually pull the specific configuration
information from the config_server.
The config_server code can be found on DETER's Github account.
The Chef recipes used are there as well.
There are two approaches to running Neo-Containers. The first is expands upon the existing Containers system; the second does not use the existing Containers system at all. Following the discussion on initial set-up, there are separate sections below describing how to use Neo-Containers in each case.
Much of the Neo-Containers system is still exposed and require the user to run a few configuration scripts. In the fullness of time, these details will be folded in to the system.
Check out the config_server repository from Github. This
repository contains the config_server code, as well as several
scripts that must be run.
It is assumed this will be checked out on users.isi.deterlab.net.
$ mkdir src
$ cd src
$ git clone https://github.com/deter-project/config_server.git
This method of using Neo-Containers uses the existing Containers system. This method allows the use of more complex network topologies.
Create an experiment using the existing Containers system. An NS file and the /share/containers/containerize.py script are used to create the containerized experiment.
In your NS file for each container, specify image_os, image_type, image_name, and image_url via the tb-add-node-attribute syntax. Details on each attribute are given below.
http://scratch/containers/deter_ub1404_64_vb.box)
and Windows 7 (at http://scratch/containers/deter_win7.box).
The following is an example NS file that creates one Windows container and one Ubuntu 14.04 container:
set r2d2 [$ns node]
tb-add-node-attribute $r2d2 containers:image_os windows
tb-add-node-attribute $r2d2 containers:image_type vagrant
tb-add-node-attribute $r2d2 containers:image_name deter/win7
tb-add-node-attribute $r2d2 containers:image_url
http://scratch/containers/deter_win7.box
set c3po [$ns node]
tb-add-node-attribute $c3po containers:image_os ubuntu
tb-add-node-attribute $c3po containers:image_type vagrant
tb-add-node-attribute $c3po containers:image_name ubuntu/trusty64
tb-add-node-attribute $c3p0 containers:image_url
http://scratch/containers/deter_ub1404_64_vb.box
Use the NS file to create a containerized experiment using the existing Containers scripts.
$ /share/containers/containerize.py
Note: The experiment must currently be created in the Deter group as that's where the custom pnode disk images are. This will change.
Modify the NS file generated by containerize.py to have a new image for the pnode machines.
Follow these steps in your browser:
After making these modifications, each pnode in the NS file should have these lines:
tb-set-node-os ${pnode(0000)} PNODE-BASE
tb-set-hardware ${pnode(0000)} MicroCloud
The final NS file will look something like this:
set ns [new Simulator]
source tb_compat.tcl
tb-make-soft-vtype container0 {dl380g3 pc2133 MicroCloud}
set pnode(0000) [$ns node]
tb-set-node-os ${pnode(0000)} PNODE-BASE
tb-set-hardware ${pnode(0000)} container0
tb-set-node-failure-action ${pnode(0000)} "nonfatal"
$ns rtproto Static
$ns run
On the experiment's webpage, swap in the experiment.
Populate the configuration database that runs on
chef.isi.deterlab.net by running the load_containers_db.sh
and load_config_db.sh database-population scripts.
This should be run on a single physical node in the experiment.
pnode-0000 is used in the example below.
The <expid> and <projid> fields in the following example are referring to the experiment ID and the project ID. The experiment ID is defined by the user, and could be something like "neocont-test" or "netstriping". For now, the project ID should always be "Deter".
$ ssh pnode-0000.<expid>.<projid>
$ cd <config_server-repo>/bin
$ ./load_config_db.sh
$ ./load_containers_db.sh -p <projid> -e <expid>
This step will be automated in the future.
The Chef system is used to bootstrap and configure the nodes. All the steps for this are enclosed in the bootstrap_node.sh script.
The script needs to know which node's role in the experiment. There are currently three roles: pnode, container, and win-container.
On all the pnodes which will be running containers:
$ ssh <pnode>.<expid>.<projid>
$ cd <config_server-repo>/bin
$ ./bootstrap_node.sh -r pnode
The pnode only have to be bootstrapped once per experiment swap in. Once a pnode is bootstrapped into chef, chef-client needs to be run. The pnode role will spawn the containers and configure them. So once the chef-client command is run on a pnode, all containers on that be pnode will be running and configured.
$ ssh <pnode>.<expid>.<projid>
$ cd <config_server-repo>/bin
$ sudo chef-client
It is easy to fix problems if something should go wrong with bootstrapped nodes. Running "sudo chef-client" will re-configure the nodes (both pnodes and the containers).
If all the preceding steps succeeded, then your pnodes and containers are configured, booted, and ready for use.
This method of using Neo-Containers does not use the existing Containers system. This method allows the containers to be associated with physical nodes. It requires the user to manually compute IP addresses for the container nodes. Standard NS files are used in DETER experiments in this method of using Neo-Containers.
Create an experiment without using the existing Containers system. This experiment requires an NS file with a fully connected network. The PNODE-BASE image must be used for all machines which will run containers. The NS file must be loaded into the DETER system in the usual way.
Example NS file:
set ns [new Simulator]
source tb_compat.tcl
set nodes "leda swan"
tb-make-soft-vtype pnode_hardware {pc2133 MicroCloud}
foreach node $nodes {
set $node [$ns node]
tb-set-node-os $node PNODE-BASE
tb-set-hardware $node pnode_hardware
}
set lan0 [$ns make-lan $nodes 100Mb 0ms]
$ns rtproto Static
$ns run
A nodes.json file must be created that will describe the containers in the experiment. This file is only used to define the containers for this experiment. (The file need not be named nodes.json, but that is the name that will be used in this documentation.)
Each node must have the following fields defined in the nodes.json file.
http://scratch/containers/deter_ub1404_64_vb.box)
and Windows 7 (at http://scratch/containers/deter_win7.box).
The following is an example nodes.json file that creates one Ubuntu 14.04 container and one Windows container:
[
{
"host": "leda",
"name": "sarah",
"image_url": "http://scratch/containers/deter_ub1404_64_vb.box",
"image_os": "ubuntu 14.04 64",
"image_type": "vagrant",
"image_name": "deter/ub14",
"interfaces": [
{ "address": "10.1.1.101", "mac": "de:ad:be:ef:00:be" }
]
},
{
"host": "swan",
"name": "helena",
"image_url": "http://scratch/containers/deter_win7_candidate.box"
"image_os": "windows",
"image_type": "vagrant",
"image_name": "deter/win7",
"interfaces": [
{ "address": "10.1.1.201", "mac": "de:ad:be:ef:00:af" }
]
}
]
DETER must allocate the control network address for the containers prior to experiment swap-in. This allocation occurs by passing the nodes.json file to DETER.
The <expid> and <projid> fields in the following example are referring to the experiment ID and the project ID. The experiment ID is defined by the user, and could be something like "neocont-test" or "netstriping". For now, the project ID should always be "Deter".
$ cd <config_server-repo>/bin
$ ./load_containers_db.sh -p <projid> -e <expid>
This must only be done once per experiment. It does not have to be done before each swap-in. Just once to reserve control net addresses from DETER.
If you decide to change the the nature of the containers run in an experiment, you must destroy the experiment and start over. This needs to be done so that DETER will unreserve the control net addresses it previously reserved for the containers.
On the experiment's webpage, swap in the experiment.
Populate the configuration database that runs on
chef.isi.deterlab.net by running the load_containers_db.sh
and load_config_db.sh database-population scripts.
This should be run on a single physical node in the experiment.
pnode-0000 is used in the example below.
The <expid> and <projid> fields in the following example are referring to the experiment ID and the project ID. The experiment ID is defined by the user, and could be something like "neocont-test" or "netstriping". For now, the project ID should always be "Deter".
$ ssh pnode-0000.<expid>.<projid>
$ cd <config_server-repo>/bin
$ ./load_config_db.sh
This step will be automated in the future.
The Chef system is used to bootstrap and configure the nodes. All the steps for this are enclosed in the bootstrap_node.sh script.
The script needs to know which node's role in the experiment. There are currently three roles: pnode, container, and win-container.
On all the pnodes which have containers running on them:
$ ssh <pnode>.<expid>.<projid>
$ cd <config_server-repo>/bin
$ ./bootstrap_node.sh -r pnode
It is easy to fix problems if something should go wrong with bootstrapped nodes. Running "sudo chef-client" will re-configure the nodes (both pnodes and the containers).
If all the preceding steps succeeded, then your pnodes and containers are configured, booted, and ready for use.
There are a number of things that may be done after the containers are configured and booted. These include the following:
$ ssh pnode
$ ssh username@containernode
Cygwin is installed on Windows nodes so you can ssh to Windows
containers as well.
| Command | Purpose |
| vagrant status | confirm containers are running |
| vagrant ssh containernode | login "vagrant"; password "vagrant" |
| vagrant reload containernode | reboot a container |
| vagrant halt containernode | halt a container |
| vagrant up containernode | boot a container |
config node
After an experiment is complete, the experiment data must be removed from the configuration database. There are two ways this may be done.
Method 1: On a host which can talk to chef.isi.deterlab.net,
run these commands:
$ cd <config_server-repo>/bin
$ rm_experiment_config.sh -p <projid> -e <expid>
Method 2: The config_server may be called directly:
$ curl http://chef:5320/exp/<projid>/<expid>/delete
Since the system runs on Chef anyone authorized to push chef recipes to the chef server can write custom node configuration code.
The system uses Vagrant to spin up the containers, thus any Vagrant-supported image can run in a container. However, the image must be downloaded and served via HTTP.
}}}