[[TOC]] = Users Guide / Tutorial = This document describes the workflow and commands to create an use a containerized experiment. We work through a couple examples showing the major features of the containers system. Detailed descriptions of the commands and configuration files are in the [wiki:ReferenceGuide reference section]. == A Containerized Experiment == This example will walk through creating an experimental topology starting with how to describe a topology through building and using the containerized experiment. === Describing the Topology === Our first example is a star topology. We create a central node and connect 9 other nodes to it. It looks like this: [[Image(visualization-small.png)]] For this example we will use the standard DETER topology descriptions. If you have never used DETER, you should work through the [https://trac.deterlab.net/wiki/Tutorial DETER tutorial] first. The container system is largely compatible with the physical DETER interface. A DETER-compatible ns2 description of that topology is [attachment:example1.tcl attached to this page]. You can download it to {{{users.isi.deterlab.net}}} and follow along. It is a simple loop, along with the standard DETER boilerplate. This file can be used to create a 10-node (9 satellites and one central node) physical experiment on DETER, although there are not many physical nodes on DETER with 10 interfaces (one interface for control traffic). {{{ source tb_compat.tcl set ns [new Simulator] # Create the center node (named by its variable name) set center [$ns node] # Connect 9 satellites for { set i 0} { $i < 9 } { incr i} { # Create node n-1 (tcl n($i) becomes n-$i in the experiment) set n($i) [$ns node] # Connect center to $n($i) ns duplex-link $center $n($i) 100Mb 10ms DropTail } # Creation boilerplate $ns rtptoto Static $ns run }}} With the detailed experiment description in front of us, we see a few more details. The central node is named "center" and each satellite is names "n-0", "n-1"... through "n-8". Each connection is a 100 Mb/s link with a 10ms delay. The round trip time from n-0 to center will be 20 ms and from n-0 to n-1 will be 40 ms. === Creating The Containerized Experiment === The container system will build the containerized experiment on top of a DETER physical experiment. We do this by running a command from the shell on {{{users.isi.deterlab.net}}}. With a copy of the [attachment:example1.tcl example topology] in your home directory named {{{experiment1.tcl}}}, the following command will create the containerized experiment: {{{ $ /share/containers/containerize.py DeterTest example1 ~/example1.tcl }}} The first two parameters are the project and experiment name to hold the DETER experiment. This invocation will create an experiment called {{{experiment1}}} in the {{{DeterTest}}} project. As with any DETER experiment, you must be a member of the project with appropriate rights to create an experiment in it. {{{containerize.py}}} expecte there to be no experiment with that name, and it will fail if one exists. To remove an experiment you can terminate it through the web interface or use the {{{endexp}}} command. Terminating an experiment is more final than swapping one out, so be sure that you want to replace the old experiment. You can also resolve the conflict by renaming your new containerized experiment. The last parameter is the file containing the topology. That can be an ns2 file, like [attachment:example1.tcl our example], or a [http://fedd.deterlab.net/wiki/TopDl topdl] description. An ns2 description must end in {{{.tcl}}} or {{{.ns}}}. With these default parameters {{{containerize.py}}} will put each node into an [http://openvz.org Openvz container] with at most 10 containers per physical node. Running the command above on users -- '''make sure you run it with a project you are a member of''' -- yields: {{{ users:~$ /share/containers/containerize.py DeterTest example1 ~/example1.tcl Containerized experiment DeterTest/example1 successfully created! Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example1 }}} Now we can see what a containerized experiment looks like. === The Contents of a Containerized Experiment === If you follow the link to that {{{containerize.py}}} prints, you will see a standard DETER experiment page that looks like this: [[Image(experiment-page.png)]] This may surprise you. In particular, you may be surprised to see that DETER thinks the experiment has only one node: [[Image(hilighted.png)]] The containers system has rewritten the description file and stored additional information in the experiment's per-experiment directory that will be used to create the 10 node experiment inside the single-node DETER experiment. If you look at the ns file DETER has stored (the NS file tab on the experiment page), you will see this file: {{{ set ns [new Simulator] source tb_compat.tcl tb-make-soft-vtype container0 {pc2133 bpc2133 MicroCloud} set pnode(0000) [$ns node] tb-set-node-os ${pnode(0000)} CentOS6-64-openvz tb-set-hardware ${pnode(0000)} container0 tb-set-node-startcmd ${pnode(0000)} "sudo /share/containers/setup/hv/bootstrap /proj/DeterTest/exp/example1/containers/site.conf >& /tmp/container.log" tb-set-node-failure-action ${pnode(0000)} "nonfatal" $ns rtproto Static $ns run }}} That looks nothing like the file we gave to {{{containerize.py}}}, but it does show us a little about what the containers system has done. The single physical node ({{{pnode(0000)}}}) will run the {{{CentOS6-64-openvz}}} image and run on a few kinds of node. On startup {{{pnode(0000)}}} will execute a command from the same {{{/share/containers}}} directory that {{{containerize.py}}} ran from using data in the per-experiment directory {{{/proj/DeterTest/exp/example1/containers/site.conf}}}. There is a separate {{{/proj/DeterTest/exp/example1/containers/}}} directory for each experiment. The path element fater {{{/proj}}} is replaced with the project under which the experiment was created, {{{DeterTest}}} in this example, and the element after {{{exp}}} is the experiment name, {{{example1}}} in this case. These directories are created for all DETER experiments. The {{{containers}}} sub-directory holds information specific to a containerized experiment. There are a few useful bits of data in that per-experiment containers directory that we can look at. To avoid the long pathname we will talk about files in {{{containers/}}}, the subdirectory. First, a copy of the topology that we gave to {{{containerize.py}}} is available in {{{/proj/DeterTest/exp/example1/containers/experiment.tcl}}}. If the experiment is created from a topdl file, the filename will be {{{containers/experiment.tcl}}}. A simple vizualization of the experiment is in {{{containers/visualization.png}}}. This is annotated with node and network names as well as interface IP addresses. The topology depiction [attachment:visualization-small.png above] is an example. A [attachment:visualization.png larger version] is also attached. The {{{containers/hosts}}} file is a copy of the IP to hostname mapping found on each virtual machine in the topology. It can be useful in converting IP addresses back to names. It is installed in {{{/etc/hosts}}} or the equivalent on each machine. The two files {{{/var/containers/pid}}} and {{{/var/containers/eid}}} contain the project name and experiment name. Scripts can make use of these. The rest of the contents of that directory are primarily used internally by the implementation, but a more detailed listing is in the [ReferenceGuide#Per-experimentDirectory reference guide]. At this point, as with any DETER experiment, the topology does not have any resources attached. To get the resources, swap the experiment in from the web interface or using the {{{swapexp}}} command. === Using the Experiment === Swapin is just the start for a containerized experiment. Once the DETER web interface reports that the experiment has finished its swap-in, the programs that convert the physical topology into the virtual topology have just started to run. At the moment, the containers system does not have a good mechanism for notifying the world that the virtual topology has been successfully created. We are working on resolving this shortcoming, and in the long run we expect [http://montage.deterlab.net MAGI agents] to provide this functionality. Until then, you can ping or try to ssh to individual nodes in the experiment, or use the [UsersGuide#StartCommands workaround we sugeest below]. Once the containerized elements have all started, the nodes are available as if they were physical nodes. For example, we can access node {{{n-0}}} of the experiment we swapped in by: {{{ $ ssh n-0.example1.detertest }}} Be sure that you replace {{{example1}}} with the experiment name you passed to {{{containerize.py}}} and {{{DeterTest}}} with the project you created the experiment under. This is a DNS name, so it is case-insensitive. When the ssh succeeds you will have access to an Ubuntu 10.04 32-bit node with the same directories mounted as in a physical deter experiment. Your home directory will be mounted, so your ssh keys will work for accessing the machine. To confirm that the containerized experiment is working as we expect, we can ping other nodes, using the [https://trac.deterlab.net/wiki/Tutorial/UsingNodes#Hostnamesforyournodes same node naming conventions] as physical DETER experiments. Containerized nodes access the control net as well, so access them using the [https://trac.deterlab.net/wiki/Tutorial/UsingNodes#Hostnamesforyournodes same node naming conventions]. Here is a ping from {{{n-0}}} to {{{center}}} and {{{n-1}}}. {{{ n-0:~$ ping -c 3 center PING center-tblink-l21 (10.0.0.2) 56(84) bytes of data. 64 bytes from center-tblink-l21 (10.0.0.2): icmp_seq=1 ttl=64 time=20.4 ms 64 bytes from center-tblink-l21 (10.0.0.2): icmp_seq=2 ttl=64 time=20.0 ms 64 bytes from center-tblink-l21 (10.0.0.2): icmp_seq=3 ttl=64 time=20.0 ms --- center-tblink-l21 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2002ms rtt min/avg/max/mdev = 20.052/20.184/20.445/0.184 ms n-0:~$ ping -c 3 n-1 PING n-1-tblink-l5 (10.0.6.1) 56(84) bytes of data. 64 bytes from n-1-tblink-l5 (10.0.6.1): icmp_seq=1 ttl=64 time=40.7 ms 64 bytes from n-1-tblink-l5 (10.0.6.1): icmp_seq=2 ttl=64 time=40.0 ms 64 bytes from n-1-tblink-l5 (10.0.6.1): icmp_seq=3 ttl=64 time=40.0 ms --- n-1-tblink-l5 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2003ms rtt min/avg/max/mdev = 40.094/40.318/40.764/0.355 ms }}} The nodes have the expected round trip times. At this point you can load and run software and generally experiment normally. === Start Commands === DETER provides a facility to run a command when the experiment starts, called [https://trac.deterlab.net/wiki/Tutorial/CreatingExperiments#Startingyourapplicationautomatically start commands]. A containerized experiment offers a similar facility with a few differences: * The start commands are not coordinated across nodes. In DETER the start commands all execute when the last node has reported to the testbed that it has completed booting. In a containerized experiment, the startcommands run when the containerized node has come up. * Start commands have to be shorter than in DETER because the container system is also using the facility. * The event system cannot be used to prplay the start command. While start commands that make use of shell syntax for multiple commands and file redirection will generally work, syntax errors will cause them to fail silently. Because of this, and because containerized experiments cannot have as long a start command string, we recommend that if you are doing anything more complex than calling a single program, you script this and run the script from the per-expriment directory or your home directory. Start commands give offer a simple workaround for detecting that all nodes in an experiment have started. {{{ #!/bin/sh STARTDIR="/proj/"`cat /var/containers/pid`"/exp/"`cat /var/containers/eid`"/startup" mkdir $STARTDIR date > $STARTDIR/`hostname` }}} Making the script above the start command of all nodes will put the time that each local container came up in the the {{{startup}}} directory under the per-experiment directories. For example, {{{n-0.example1.DeterTest}}} will create {{{/proj/DeterTest/exp/example1/startup/n-0}}}. An experimenter can monitor that directory on {{{users}}} and know which nodes are up. === Releasing Resources === As with a physical DETER experiment, you release resources by swapping the experiment out using the web interface or the {{{swapexp}}} command. If you are using the [UsersGuide#StartCommands startcommand workaround] to detect startup, clear the startup directory when you swap the experiment out. == Advanced Usage == The previous section showed how to create an experiment using only openvz containers packed 10 to a machine. This section shows how to change those parameters. === Using Other Container Types === To change the container type that {{{containerize.py}}} assigns to nodes, use the {{{--default-container}}} option. Valid choices follow the [NewIntro#KindsofContainers kinds of containers] DETER suports. Specifically: || __Parameter__ || __Container__ || || {{{embedded_pnode}}} || Physical Node || || {{{qemu}}} || Qemu VM || || {{{openvz}}} || Openvz Container || || {{{process}}} || ViewOS process || We can try this on our [attachment:example1.tcl example topology]: {{{ users:~$ /share/containers/containerize.py --default-container qemu DeterTest example2 ~/example1.tcl Requested a QEMU node with more than 7 experimental interfaces. Qemu nodes can only support 7 experimental interfaces. }}} The good news is that the container system is using qemu containers to build our experiment. Unfortunately qemu containers only support 7 experimental interfaces, an internal limit on the number of interfaces the virtual hardware supports. A [attachment:example2.tcl version of the topology with fewer satellites] will containerize without error. {{{ $ /share/containers/containerize.py --default-container qemu DeterTest example2 ~/example2.tcl Containerized experiment DeterTest/example2 successfully created! Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example2 }}} The qemu experiment looks much like the openvz experiment above, at this small scale. Qemu nodes more completely emulate hardware and the kernels are independent, unlike openvz containers. For example, a program can load kernel modules in a qemu VM, which it cannot do in an openvz container. The qemu containers load the Ubuntu 12.04 (32 bit) distribution by default. We can also swap in the experiment using ViewOS processes, but processes cannot be manipulated from outside. They are too lightweight to allow an ssh login, though they will run a start command. === Mixing Containers === Mixing containers requires the experimenter to assign container types in their topology description. This is done by attaching an attribute to nodes. The attribute is named {{{containers:node_type}}} it takes the same values as the [UsersGuide#UsingOtherContainerTypes --default-container parameter to containerize.py]. If the experiment definition is in [http://fedd.isi.deterlab.net/wiki/TopDl topdl] the attribute can be attached using the [http://fedd.deterlab.net/wiki/TopdlLibrary#SharedFunctions standard topdl routines]. Attaching the attribute in ns2 is done using the DETER {{{tb-add-node-attribute}}} command. {{{ tb-add-node-attribute $node containers:node_type openvz }}} That command in an ns2 topology description will set {{{node}}} to be placed in an openvz container. Using this feature, we can modify our [attachment:example1.tcl first topology] to consist of qemu nodes and a single process container in the center. Process nodes can have unlimited interfaces, but we cannot log into them. The [attachment:example3.tcl new topology file] looks like this: {{{ source tb_compat.tcl set ns [new Simulator] # Create the center node (named by its variable name) set center [$ns node] # The center node is a process tb-add-node-attribute $center containers:node_type process # Connect 9 satellites for { set i 0} { $i < 9 } { incr i} { # Create node n-1 (tcl n($i) becomes n-$i in the experiment) set n($i) [$ns node] # Satellites are qemu nodes tb-add-node-attribute $n($i) containers:node_type qemu # Connect center to $n($i) ns duplex-link $center $n($i) 100Mb 10ms DropTail } # Creation boilerplate $ns rtptoto Static $ns run }}} Because we have explicitly set the {{{container_node_type}}} of each node, the {{{--default-container}}} parameter to {{{containerize.py}}} does nothing. We can create this experiment using: {{{ users:~$ /share/containers/containerize.py DeterTest example3 ~/example3.tcl Containerized experiment DeterTest/example3 successfully created! Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example3 }}} When we swap it in, the experiment will have 10 satellite containers in qemu VMs and a central process that only forwards packets. Again, you cannot log in to a process container, but you can use the qemu nodes as though they were physical machines. Another interesting mixture of containers is to put a physical node into the mix. Here is a modified version of [attachment:example3.tcl our mixed topology] that places the {{{n-8}}} satellite on a physical computer, by setting its {{{containers:node_type}}} to {{{embedded_pnode}}}. After creating that experiment: {{{ users:~$ /share/containers/containerize.py DeterTest example4 ~/example4.tcl Containerized experiment DeterTest/example4 successfully created! Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example4 }}} We can call up the DETER experiment page and look at the visualization tab: [[Image(embedded_pnode.png)]] The physical node {{{n-8}}} shows up in the DETER visualization, and otherwise acts as a physical node that is in a 10-node topology. This experiment uses three different container types: physical nodes, ViewOS processes, and Qemu VMs. === Setting Openvz Parameters === An advantage of openvz nodes is that the OS flavor and CPU bit-width can be set across experiments and per-node. Similarly the size of the disk allocated to each node can be set. Openvz uses templates to look like various linux installations. The choices of Linux distribution that openvz supports are: || __Template__ || __Distribution__ || __Bit-width__ || || centos-6-x86 || CentOS 6 || 32 bit || || centos-6-x86_64 || CentOS 6 || 64 bit || || ubuntu-10.04-x86 || Ubuntu 10.04 LTS || 32 bit || || ubuntu-10.04-x86_64 || Ubuntu 10.04 LTS || 64 bit || || ubuntu-12.04-x86 || Ubuntu 12.04 LTS || 32 bit || || ubuntu-12.04-x86_64 || Ubuntu 12.04 LTS || 64 bit || By default the {{{ubuntu-10.04-x86}}} template is used. To set a template across an entire topology, give {{{--openvz-template}}} and the template name from the list above. Invoking {{{containerize.py}}} on [attachment:example1.tcl our original example] as below will instantiate the experiment under 64-bit Ubuntu 12.04: {{{ users:~$ /share/containers/containerize.py --openvz-template ubuntu-12.04-x86_64 DeterTest example1 ~/example1.tcl Containerized experiment DeterTest/example1 successfully created! Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example1 }}} We can set the size of the file system of containers in the experiment using {{{--openvz-diskspace}}}. The value of the parameter is determined by the suffix: || __Suffix__ || __Value__ || || G || Gigabytes || || M || Megabytes || The default openvz file system size is 2GB. The most practical suffix for DETER nodes is "G": {{{ users:~$ /share/containers/containerize.py --openvz-diskspace 15G DeterTest example1 ~/example1.tcl Containerized experiment DeterTest/example1 successfully created! Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example1 }}} Each of these parameters can be set on individual nodes using attributes. The attribute to set a template on a node is {{{containers:openvz_template}}} and the attribute to set the disk space is {{{containers:openvz_diskspace}}}. [attachment:example5.tcl This example] shows setting these openvz parameters per node: {{{ source tb_compat.tcl set ns [new Simulator] # Create the center node (named by its variable name) set center [$ns node] # The center node is a process tb-add-node-attribute $center containers:node_type process tb-add-node-attribute $center containers:openvz_template ubuntu-12.04-x86_64 # Connect 9 satellites for { set i 0} { $i < 9 } { incr i} { # Create node n-1 (tcl n($i) becomes n-$i in the experiment) set n($i) [$ns node] # Set satellite disk sizes to be 20 GB tb-add-node-attribute $n($i) containers:openvz_diskspace 20G # Connect center to $n($i) ns duplex-link $center $n($i) 100Mb 10ms DropTail } # Creation boilerplate $ns rtptoto Static $ns run }}} The {{{center}}} node will run Ubuntu 12.04 64 bit and the satellites will have 20GB file systems. === Setting Qemu Parameters === The containers system has a more limited ability to set qemu parameters. Right now a custom image can be loaded using the {{{containers::qemu_url}}} attribute and the architecture of the qemu VM can be chosen using {{{containers:qemu_arch}}}. Valid qemu architectures are: || __Param__ || __Meaning__ || || i386 || 32 bit Intel || || x86_64 || 64-bit Intel || The image URL must be reachable from inside DETER. The image must be a qcow2 image, optionally bzip2ed. Facilities to snapshot and store such images are in development. If you are using a qemu image that is not booting into containers, make sure [ReferenceGuide#BootableQemuImages grub is properly configured] === Changing The Packing Factor === The {{{containerize.py}}} program is deciding how many virtual nodes to put on each physical machine. Because we have been using roughly the same number of nodes as the default packing target (10 nodes per machine) all the examples have fit on a single machine. If we change the packing factor, using the {{{--packing}}} parameter to {{{containerize.py}}} we can put fewer nodes on each machine. For example: {{{ users:~$ /share/containers/containerize.py --packing 2 DeterTest example1 ~/example1.tcl Containerized experiment DeterTest/example1 successfully created! Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example1 }}} Calls {{{containerize.py}}} on our [attachment:example1.tcl original topology] with a low packing factor. The result is the same nodes spread across more physical machines, as we can see from the DETER web interface (visualization tab): [[Image(loose.png)]] You will want to balance how many physical machines you use against how precisely you want to mimic them. === User Packing === An experimenter can specify their own packing using the {{{containers:partition}}} attribute; it is integer-valued. All nodes with the smae partition are allocated to the same machine. If nodes have that attribute attached to them, {{{containers.py}}} will assume that they all have been paritioned and use those. Nodes without a partition assigned are taken to be {{{embedded_pnode}}}s. === More Sophisticated Packing: Multiple Passes === The previous examples have all treated packing containers onto physical machines as a single step process with a single parameter - the packing factor. In fact, we can divide containers into sets and pack each set independently using different parameters. For example in an experiment with many containers dedicated only to forwarding packets and a few to modeling servers, we could create two sets and pack the forwarders tightly (a high packing factor) and the servers loosely. In return for the greater control on packing, there is a price. When a set of containers is packed, the containers system takes into account both the nodes to be packed and their interconnections. When subsets of containers are packed, the system cannot consider the interconnections between subsets. In some cases, the packing of subsets can lead to a DETER experiment that cannot be created successfully. This danger is mitigated by the fact that containers that are packed together are often related in ways that limit the number of connections between that set and another. To explore packing, we need a [attachment:example6.tcl larger topology]: {{{ source tb_compat.tcl set ns [new Simulator] set center [$ns node] tb-add-node-attribute $center "containers:PartitionPass" 0 for { set i 0} { $i < 3 } { incr i} { set lanlist $center for { set j 0 } { $j < 20} { incr j } { set idx [expr $i * 20 + $j] set n($idx) [$ns node] tb-add-node-attribute $n($idx) "containers:PartitionPass" [expr $i + 1] lappend lanlist $n($idx) } set lan($i) [$ns make-lan [join $lanlist " "] 100Mb 0] } # Creation boilerplate $ns rtptoto Static $ns run }}} This creates 3 20-node subnetworks attached to a single central router. It looks like this: [[Image(packing-small.png)]] Each node in the topology is assigned a {{{containers::PackingPass}}} attribute that groups them into subsets. The {{{conatiners:PackingPass}}} attribute must be assigned an integer value. The nodes in each packing pass are considered together when packing. Each pass can be assigned different parameters. The passes are carried out in order, though that is rarely important. Our topology assigns {{{center}}} to pass 0, the nodes on {{{lan-0}}} (the tcl variable lan(0)) to pass 1, those on {{{lan-1}}} to pass 2 and those on {{{lan-2}}} to pass 3. We will use the {{{--pass-pack}}} parameter to specify the packing factor for each pass. Each packing factor specification looks like ''pass'':''factor'' where pass and factor are both integers. We can specify more than one, separated by commas, or specify {{{--pass-pack}}} more than once. For example, we can pack the experiment using the following factors: || __Pass__ || __Packing Factor__ || || 0 || 1 || || 1 || 20 || || 2 || 10 || || 3 || 5 || By issuing: {{{ users:~$ /share/containers/containerize.py --pass-pack 0:1,1:20,2:10,3:5 DeterTest example6 ~/example6.tcl Containerized experiment DeterTest/example6 successfully created! Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example6 }}} We can view the packing by using {{{container_image.py}}} to generate a visualization that includes the partitions: {{{ users:~$ /share/containers/container_image.py --experiment DeterTest/example6 --partitions --out ~/example6.png }}} The output shows the topology with boxes drawn around the containers that share a physical node: [[Image(example6-smaller.png)]] That partitioning is surprising in that {{{lan-1}}} is split into 3 partitions of 6 & 7 nodes rather than 2 parititons of 10. Similarly {{{lan-2}}} is split into 5 groups of 4 rather than 4 groups of 5. The packing system is built on the [http://glaros.dtc.umn.edu/gkhome/metis/metis/overview metis] graph paritioning software. Metis takes a graph and a number of partitions and finds the most balanced partitioning that has roughly equal node counts in each partition as well as low inter-partition communication costs. The containers system calls metis with increasing numbers of paritions until a partitioning is found that meets the packing factor limits. When the system attempts to pack {{{lan-1}}} into 2 partitions, metis balances the node counts and the communications costs to produce a partition with 9 containers in one machine and 11 on the other. That partitioning does not meet the 10 node limit, so it tries again with 3 partitions and succeeds. There are two ways to fit our topology onto fewer nodes. The first is to put slightly more slop into the packing factors: || __Pass__ || __Packing Factor__ || || 0 || 1 || || 1 || 20 || || 2 || 11 || || 3 || 6 || {{{ users:~$ /share/containers/containerize.py --pass-pack 0:1,1:20,2:11,3:6 DeterTest example6 ~/example6.tcl Containerized experiment DeterTest/example6 successfully created! Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example6 }}} These parameters result in this packing, which fits in fewer nodes, but has the slight imbalances of splitting {{{lan-1}}} into 9 and 11 containers and {{{lan-2}}} into 4,5,and 6 container partitions. Again, this asymmetry is an attempt to consider the internode networking costs. [[Image(example6.2-smaller.png)]] If the packing constraints are exact - 11 containers on {{{lan-1}}} is unacceptable - a second choice is to use the {{{--nodes-only}}} option. This sets the cost of each arc in the graph to 0. Metis ignores such arcs altogether, so the partitions are completely even. This may cause trouble in more complex network topologies. The result of (original packing factors and {{{--nodes-only}}}) {{{ users:~$ /share/containers/containerize.py --nodes-only --pass-pack 0:1,1:20,2:10,3:5 DeterTest example6 ~/example6.tcl Containerized experiment DeterTest/example6 successfully created! Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example6 }}} is [[Image(example6.3-smaller.png)]] which has symmetric partitions. Sometimes it is more intuitive to think in terms of the number of machines that will be used to hold containers. The {{{--size}}} and {{{-pass-size}}} options let users express that. The {{{--size=}}}''expsize'' option uses ''expsize'' machines to hold the whole experiment. If multiple passes are made, each is put into ''expsize'' physical machines. The {{{--size}}} option takes precedence over {{{--packing}}}. Per-pass sizing can be done using {{{--pass-size}}} which uses the same syntax as {{{--pass-pack}}}. So: {{{ users:~$ /share/containers/containerize.py --pass-size 0:1,1:1,2:2,3:4 DeterTest example6 ~/example6.tcl Containerized experiment DeterTest/example6 successfully created! Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example6 }}} packs pass 0 into 1 physical machine, pass 1 into 1 physical machine, pass 2 into 2 physical machines and pass 3 into 4 physcial machines. The result looks like: [[Image(example6.2-smaller.png)]] Partitions have different numbers of containers in them because metis is considering network constraints as well. As with using packing, adding {{{--nodes-only}}} restores symmetry: [[Image(example6.3-smaller.png)]] The {{{--pass-pack}}} option is a per-pass generalization of the {{{--packing}}} option. The options that can be specified per-pass are: || __Single-pass__ || __Per-Pass__ || __Per-Pass Format__ || __Per-Pass Example__ || || {{{--packing}}} || {{{--pass-pack}}} || ''pass'':''packing'' (comma-separated) || --pass-pack 0:1,1:20,2:11,3:6 || || {{{--size}}} || {{{--pass-size}}} || ''pass'':''size'' (comma-separated) || --pass-size 0:1,1:1,2:2,3:4 || || {{{--pnode-types}}} || {{{--pass-pnodes}}} || ''pass'':''pnode''[,''pnode''...] (semicolon separated) || --pass-pnodes 0:!MicroCloud;1:bpc2133,pc2133 || || {{{--nodes-only}}} || {{{--pass-nodes-only}}} || ''pass'' (comma-separated) || --pass-nodes-only 1,3,5 || The single-pass version sets a default so this invocation on [attachment:example6.tcl our 4 pass topology]: {{{ users:~$ /share/containers/containerize.py --packing 5 --pass-pack 0:1,1:20 DeterTest example6 ~/example6.tcl Containerized experiment DeterTest/example6 successfully created! Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example6 }}} will pack pass 0 with a factor of 1, pass 1 with a factor of 20 and passes 2 and 3 with factor 5. Similarly: {{{ users:~$ /share/containers/containerize.py --pass-pack 0:1,1:20,2:10,3:5 --pass-pnodes '0:pc2133,bpc2133;1:MicroCloud' DeterTest example6 ~/example6.tcl Containerized experiment DeterTest/example6 successfully created! Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example6 }}} will allocate either bpc2133 or pc2133 nodes to containers assigned by pass 0 and Microcloud physical nodes to the containers partitioned in pass 1. The rest will be allocated as the [ReferenceGuide#SiteConfigurationFile site configuration] specifies. The single quotes around the {{{--pass-pnodes}}} option protects the semi-colon from the shell. Another choice is to specify the command as: {{{ users:~$ /share/containers/containerize.py --pass-pack 0:1,1:20,2:10,3:5 --pass-pnodes 0:pc2133,bpc2133 --pass-pnodes 1:MicroCloud DeterTest example6 ~/example6.tcl }}} That formulation avoids the quotes by avoiding the semicolon. All the per-pass options may be specified multiple times on the command line. One can mix and match sizes and packing factors. This invocation: {{{ /share/containers/containerize.py --pass-size 1:10 --pass-pack 2:5,3:10 DeterTest example6 ~/example6.tcl Containerized experiment DeterTest/example6 successfully created! Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example6 }}} Produces: [[Image(example6.4-smaller.png)]] Remember that {{{--size}}} sets a default pass size and that sizes have precedence over packing. If you specify {{{--size}}} no {{{--packing}}} or {{{--pass-packing}}} value will take effect. To mix packing and sizes, use {{{--pack-size}}} for each sized pass, rather than {{{--size}}}. These per-pass variables and user-specified pass specifications give users fine grained control over the paritioning process, even if they do not want to do the partitioning themselves. If no {{{containers:PartitionPass}}} attributes are specified in the topology, and no {{{containers:Partition}}} attributes are specified either, {{{containerize.py}} carries out at most two passes. Pass 0 paritions all openvz containers and pass 1 partitions all qemu and process containers. == Further Reading == Hopefully these illustrative examples have given you an idea of how to use the containers system and what it is capable of. More details are available from [wiki:ReferenceGuide the reference page]. Please [mailto:faber@isi.edu contact us] if you have difficulties.