Users Guide / Tutorial

This document describes the workflow and commands to create an use a containerized experiment. We work through a couple examples showing the major features of the containers system. Detailed descriptions of the commands and configuration files are in the reference section?.

A Conatinerized Experiment

This example will walk through creating an experimental topology starting with how to describe a topology through building and using the containerized experiment.

Describing the Topology

Our first example is a star topology. We create a central node and connect 10 other nodes to it. It looks like this:

For this example we will use the standard DETER topology descriptions. If you have never used DETER, you should work through the ​DETER tutorial first. The container system is largely compatible with the physical DETER interface.

A DETER-compatible ns2 description of that topology is [attachnemt:example1.tcl attached to this page]. You can download it to users.isi.deterlab.net and follow along. It is a simple loop, along with the standard DETER boilerplate. This file can be used to create a 11-node (10 satellites and one central node) physical experiment on DETER, although there are not many physical nodes on DETER with 10 interfaces.

source tb_compat.tcl
set ns [new Simulator]

# Create the center node (named by its variable name)
set center [$ns node]

# Connect 10 satellites
for { set i 0} { $i < 10 } { incr i} {
    # Create node n-1 (tcl n($i) becomes n-$i in the experiment)
    set n($i) [$ns node]
    # Connect center to $n($i)
    ns duplex-link $center $n($i) 100Mb 10ms DropTail
}

# Creation boilerplate
$ns rtptoto Static
$ns run

With the detailed experiment description in front of us, we see a few more details. The central node is named "center" and each satellite is names "n-0", "n-1"... through "n-9". Each connection is a 100 Mb/s link with a 10ms delay. The round trip time from n-0 to center will be 20 ms and from n-0 to n-1 will be 40 ms.

Creating The Containerized Experiment

The container system will build the containerized experiment on top of a DETER physical experiment. We do this by running a command from the shell on users.isi.deterlab.net. With a copy of the example topology​ in your home directory, the following command will create the containerized experiment:

$ /share/containers/containerize.py DeterTest exmaple1 ~/example1.tcl 

The first two parameters are the project and experiment name to hold the DETER experiment. This invocation will create an experiment called experiment1 in the DeterTest project. As with any DETER experiment, you must be a member of the project with appropriate rights to create an experiment in it. containerize.py expecte there to be no experiment with that name, and it will fail if one exists. To remove an experiment you can terminate it through the web interface or use the endexp command. Terminating an experiment is more final than swapping one out, so be sure that you want to replace the old experiment. You can also resolve the conflict by renaming your new containerized experiment.

The last parameter is the file containing the topology. That can be an ns2 file, like our example​, or a ​topdl description. An ns2 description must end in .tcl or .ns.

With these default parameters containerize.py will put each node into an ​Openvz container with about 10 containers per physical node.

Running the command above on users -- make sure you run it with a project you are a member of -- yields:

users:~$ /share/containers/containerize.py DeterTest example1 ~/example1.tcl 
Containerized experiment DeterTest/example1 successfully created!
Access it via http://www.isi.deterlab.net//showexp.php3?pid=DeterTest&eid=example1

Now we can see what a containerized experiment looks like.

The Contents of a Containerized Experiment

If you follow the link to that containerize.py prints, you will see a standard DETER experiment page that looks like this:

This may surprise you. In particular, you may be surprised to see that DETER thinks the experiment has only one node:

The containers system has rewritten the description file and stored additional information in the experiment's per-experiment directory that will be used to create the 11 node experiment inside the single-node DETER experiment. If you look at the ns file DETER has stored (the NS file tab on the experiment page), you will see this file:

set ns [new Simulator]
source tb_compat.tcl

tb-make-soft-vtype container0 {pc2133 bpc2133 MicroCloud}
set pnode(0000) [$ns node]
tb-set-node-os ${pnode(0000)} CentOS6-64-openvz
tb-set-hardware ${pnode(0000)} container0
tb-set-node-startcmd ${pnode(0000)} "sudo /share/containers/setup/hv/bootstrap /proj/DeterTest/exp/example1/containers/site.conf >& /tmp/container.log"
tb-set-node-failure-action ${pnode(0000)} "nonfatal"

$ns rtproto Static
$ns run

That looks nothing like the file we gave to containerize.py, but it does show us a little about what the containers system has done. The single physical node (pnode(0000)) will run the CentOS6-64-openvz image and run on a few kinds of node. On startup pnode(0000) will execute a command from the same /share/containers directory that containerize.py ran from using data in the per-experiment directory /proj/DeterTest/exp/example1/containers/site.conf.

There is a separate /proj/DeterTest/exp/example1/containers/ directory for each experiment. The path element fater /proj is replaced with the project under which the experiment was created, DeterTest in this example, and the element after exp is the experiment name, example1 in this case. These directories are created for all DETER experiments. The containers sub-directory holds information specific to a containerized experiment.

There are a few useful bits of data in that per-experiment containers directory that we can look at. To avoid the long pathname we will talk about files in containers/, the subdirectory.

First, a copy of the topology that we gave to containerize.py is available in /proj/DeterTest/exp/example1/containers/experiment.tcl. If the experiment is created from a topdl file, the filename will be containers/experiment.tcl.

A simple vizualization of the experiment is in containers/visualization.png. This is annotated with node and network names as well as interface IP addresses. The topology depiction above​ is an example. A larger version​ is also attached.

The containers/hosts file is a copy of the IP to hostname mapping found on each virtual machine in the topology. It can be useful in converting IP addresses back to names. It is installed in /ext/hosts or the equivalent on each machine.

At this point, as with any DETER experiment, the topology does not have any resources attached. To get the resources, swap the experiment in from the web interface or using the swapexp command.

Using the Experiment

Swapin is just the start for a containerized experiment. Once the DETER web interface reports that the experiment has finished its swap-in, the programs that convert the physical topology into the virtual topology have just started to run. At the moment, the containers system does not have a good mechanism for notifying the world that the virtual topology has been successfully created. We are working on resolving this shortcoming, and in the long run we expect ​MAGI agents to provide this functionality. Until then, you can ping or try to ssh to individual nodes in the experiment, or use the workaround we sugeest below.

Once the containerized elements have all started, the nodes are available as if they were physical nodes. For example, we can access node n-0 of the experiment we swapped in by:

$ ssh n-0.example1.detertest

Be sure that you replace example1 with the experiment name you passed to containerize.py and DeterTest with the project you created the experiment under. This is a DNS name, so it is case-insensitive.

When the ssh succeeds you will have access to an Ubuntu 10.04 32-bit node with the same directories mounted as in a physical deter experiment. Your home directory will be mounted, so your ssh keys will work for accessing the machine.

To confirm that the containerized experiment is working as we expect, we can ping other nodes, using the ​same node naming conventions as physical DETER experiments. Containerized nodes access the control net as well, so access them using the ​same node naming conventions.

Here is a ping from n-0 to center and n-1.

n-0:~$ ping -c 3 center
PING center-tblink-l21 (10.0.0.2) 56(84) bytes of data.
64 bytes from center-tblink-l21 (10.0.0.2): icmp_seq=1 ttl=64 time=20.4 ms
64 bytes from center-tblink-l21 (10.0.0.2): icmp_seq=2 ttl=64 time=20.0 ms
64 bytes from center-tblink-l21 (10.0.0.2): icmp_seq=3 ttl=64 time=20.0 ms

--- center-tblink-l21 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 20.052/20.184/20.445/0.184 ms
n-0:~$ ping -c 3 n-1
PING n-1-tblink-l5 (10.0.6.1) 56(84) bytes of data.
64 bytes from n-1-tblink-l5 (10.0.6.1): icmp_seq=1 ttl=64 time=40.7 ms
64 bytes from n-1-tblink-l5 (10.0.6.1): icmp_seq=2 ttl=64 time=40.0 ms
64 bytes from n-1-tblink-l5 (10.0.6.1): icmp_seq=3 ttl=64 time=40.0 ms

--- n-1-tblink-l5 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 40.094/40.318/40.764/0.355 ms

The nodes have the expected round trip times.

At this point you can load and run software and generally experiment normally.

Start Commands

DETER provides a facility to run a command when the experiment starts, called ​start commands. A containerized experiment offers a similar facility with a few differences:

• The start commands are not coordinated across nodes. In DETER the start commands all execute when the last node has reported to the testbed that it has completed booting. In a containerized experiment, the startcommands run when the containerized node has come up.
• Start commands have to be shorter than in DETER because the container system is also using the facility.
• The event system cannot be used to prplay the start command.

While start commands that make use of shell syntax for multiple commands and file redirection will generally work, syntax errors will cause them to fail silently. Because of this, and because containerized experiments cannot have as long a start command string, we recommend that if you are doing anything more complex than calling a single program, you script this and run the script from the per-expriment directory or your home directory.

Start commands give offer a simple workaround for detecting that all nodes in an experiment have started. A script like this:

#!/bin/sh